Microsoft Azure Administrator – Step by step Implement Traffic Management (part 10 of 17)

Student lab manual

Lab scenario

You were tasked with testing managing network traffic targeting Azure virtual machines in the hub and spoke network topology, which Contoso considers implementing in its Azure environment (instead of creating the mesh topology, which you tested in the previous lab). This testing needs to include implementing connectivity between spokes by relying on user defined routes that force traffic to flow via the hub, as well as traffic distribution across virtual machines by using layer 4 and layer 7 load balancers. For this purpose, you intend to use Azure Load Balancer (layer 4) and Azure Application Gateway (layer 7).

Note: This lab, by default, requires total of 8 vCPUs available in the Standard_Dsv3 series in the region you choose for deployment, since it involves deployment of four Azure VMs of Standard_D2s_v3 SKU. If your students are using trial accounts, with the limit of 4 vCPUs, you can use a VM size that requires only one vCPU (such as Standard_B1s).

Objectives

In this lab, you will:

  • Task 1: Provision the lab environment
  • Task 2: Configure the hub and spoke network topology
  • Task 3: Test transitivity of virtual network peering
  • Task 4: Configure routing in the hub and spoke topology
  • Task 5: Implement Azure Load Balancer
  • Task 6: Implement Azure Application Gateway

Estimated timing: 60 minutes

Architecture diagram

Task 1: Provision the lab environment

In this task, you will deploy four virtual machines into the same Azure region. The first two will reside in a hub virtual network, while each of the remaining two will reside in a separate spoke virtual network.

1.Sign in to the Azure portal.

2.In the Azure portal, open the Azure Cloud Shell by clicking on the icon in the top right of the Azure Portal.

3.If prompted to select either Bash or PowerShell, select PowerShell.

Note: If this is the first time you are starting Cloud Shell and you are presented with the You have no storage mounted message, select the subscription you are using in this lab, and click Create storage.

4.In the toolbar of the Cloud Shell pane, click the Upload/Download files icon, in the drop-down menu, click Upload and upload the files \Allfiles\Labs\06\az104-06-vms-loop-template.json and \Allfiles\Labs\06\az104-06-vms-loop-parameters.json into the Cloud Shell home directory.

AZ-104-MicrosoftAzureAdministrator/Allfiles/Labs/06 at master · MicrosoftLearning/AZ-104-MicrosoftAzureAdministrator · GitHub

5.From the Cloud Shell pane, run the following to create the first resource group that will be hosting the lab environment (replace the ‘[Azure_region]’ placeholder with the name of an Azure region where you intend to deploy Azure virtual machines)(you can use the “(Get-AzLocation).Location” cmdlet to get the region list):

$location = ‘[Azure_region]’

Now the resource group name:

$rgName = ‘az104-06-rg1’

And finally create the resource group in your desired location:

New-AzResourceGroup -Name $rgName -Location $location

6.From the Cloud Shell pane, run the following to create the three virtual networks and four Azure VMs into them by using the template and parameter files you uploaded:

New-AzResourceGroupDeployment -ResourceGroupName $rgName
-TemplateFile $HOME/az104-06-vms-loop-template.json `
-TemplateParameterFile $HOME/az104-06-vms-loop-parameters.json

Note: Wait for the deployment to complete before proceeding to the next step. This should take about 5 minutes.

7.From the Cloud Shell pane, run the following to install the Network Watcher extension on the Azure VMs deployed in the previous step:

$rgName = ‘az104-06-rg1’
$location = (Get-AzResourceGroup -ResourceGroupName $rgName).location
$vmNames = (Get-AzVM -ResourceGroupName $rgName).Name
foreach ($vmName in $vmNames) {
Set-AzVMExtension -ResourceGroupName $rgName
-Location $location -VMName $vmName
-Name ‘networkWatcherAgent’ -Publisher 'Microsoft.Azure.NetworkWatcher'
-Type ‘NetworkWatcherAgentWindows’ `
-TypeHandlerVersion ‘1.4’
}

Note: Wait for the deployment to complete before proceeding to the next step. This should take about 5 minutes.

8.Close the Cloud Shell pane.

Task 2: Configure the hub and spoke network topology

In this task, you will configure local peering between the virtual networks you deployed in the previous tasks in order to create a hub and spoke network topology

1.In the Azure portal, search for and select Virtual networks.

2.Review the virtual networks you created in the previous task.

Note: The template you used for deployment of the three virtual networks ensures that the IP address ranges of the three virtual networks do not overlap.

3.In the list of virtual networks, select az104-06-vnet2.

4.On the az104-06-vnet2 blade, select Properties.

5.On the az104-06-vnet2 | Properties blade, record the value of the Resource ID property.

6.Navigate back to the list of virtual networks and select az104-06-vnet3.

7.On the az104-06-vnet3 blade, select Properties.

8.On the az104-06-vnet3 | Properties blade, record the value of the Resource ID property.

Note: You will need the values of the ResourceID property for both virtual networks later in this task.

Note: This is a workaround that addresses the issue with the Azure portal occasionally not displaying the newly provisioned virtual network when creating virtual network peerings.

9.In the list of virtual networks, click az104-06-vnet01.

10.On the az104-06-vnet01 virtual network blade, in the Settings section, click Peerings and then click + Add.

11.Add a peering with the following settings (leave others with their default values) and click Add:

SettingValue
This virtual network: Peering link nameaz104-06-vnet01_to_az104-06-vnet2
Traffic to remote virtual networkAllow (default)
Traffic forwarded from remote virtual networkBlock traffic that originates from outside this virtual network
Virtual network gatewayNone (default)
Remote virtual network: Peering link nameaz104-06-vnet2_to_az104-06-vnet01
Virtual network deployment modelResource manager
I know my resource IDenabled
Resource IDthe value of resourceID parameter of az104-06-vnet2 you recorded earlier in this task
Traffic to remote virtual networkAllow (default)
Traffic forwarded from remote virtual networkAllow (default)
Virtual network gatewayNone (default)

Note: Wait for the operation to complete.

Note: This step establishes two local peerings – one from az104-06-vnet01 to az104-06-vnet2 and the other from az104-06-vnet2 to az104-06-vnet01.

NoteAllow forwarded traffic needs to be enabled in order to facilitate routing between spoke virtual networks, which you will implement later in this lab.

12.On the az104-06-vnet01 virtual network blade, in the Settings section, click Peerings and then click + Add

13.Add a peering with the following settings (leave others with their default values) and click Add:

SettingValue
This virtual network: Peering link nameaz104-06-vnet01_to_az104-06-vnet3
Traffic to remote virtual networkAllow (default)
Traffic forwarded from remote virtual networkBlock traffic that originates from outside this virtual network
Virtual network gatewayNone (default)
Remote virtual network: Peering link nameaz104-06-vnet3_to_az104-06-vnet01
Virtual network deployment modelResource manager
I know my resource IDenabled
Resource IDthe value of resourceID parameter of az104-06-vnet3 you recorded earlier in this task
Traffic to remote virtual networkAllow (default)
Traffic forwarded from remote virtual networkAllow (default)
Virtual network gatewayNone (default)

Note: This step establishes two local peerings – one from az104-06-vnet01 to az104-06-vnet3 and the other from az104-06-vnet3 to az104-06-vnet01. This completes setting up the hub and spoke topology (with two spoke virtual networks).

NoteAllow forwarded traffic needs to be enabled in order to facilitate routing between spoke virtual networks, which you will implement later in this lab.

Task 3: Test transitivity of virtual network peering

In this task, you will test transitivity of virtual network peering by using Network Watcher.

1.In the Azure portal, search for and select Network Watcher.

2.On the Network Watcher blade, expand the listing of Azure regions and verify that the service is enabled in the Azure into which you deployed resources in the first task of this lab.

3.On the Network Watcher blade, navigate to the Connection troubleshoot.

4.On the Network Watcher – Connection troubleshoot blade, initiate a check with the following settings (leave others with their default values):

SettingValue
Subscriptionthe name of the Azure subscription you are using in this lab
Resource groupaz104-06-rg1
Source typeVirtual machine
Virtual machineaz104-06-vm0
DestinationSpecify manually
URI, FQDN or IPv410.62.0.4
ProtocolTCP
Destination Port3389

Note10.62.0.4 represents the private IP address of az104-06-vm2

5.Click Check and wait until results of the connectivity check are returned. Verify that the status is Reachable. Review the network path and note that the connection was direct, with no intermediate hops in between the VMs.

Note: This is expected, since the hub virtual network is peered directly with the first spoke virtual network.

6.On the Network Watcher – Connection troubleshoot blade, initiate a check with the following settings (leave others with their default values)

SettingValue
Subscriptionthe name of the Azure subscription you are using in this lab
Resource groupaz104-06-rg1
Source typeVirtual machine
Virtual machineaz104-06-vm0
DestinationSpecify manually
URI, FQDN or IPv410.63.0.4
ProtocolTCP
Destination Port3389

Note10.63.0.4 represents the private IP address of az104-06-vm3

7.Click Check and wait until results of the connectivity check are returned. Verify that the status is Reachable. Review the network path and note that the connection was direct, with no intermediate hops in between the VMs.

Note: This is expected, since the hub virtual network is peered directly with the second spoke virtual network.

8.On the Network Watcher – Connection troubleshoot blade, initiate a check with the following settings (leave others with their default values):

SettingValue
Subscriptionthe name of the Azure subscription you are using in this lab
Resource groupaz104-06-rg1
Source typeVirtual machine
Virtual machineaz104-06-vm2
DestinationSpecify manually
URI, FQDN or IPv410.63.0.4
ProtocolTCP
Destination Port3389

9.Click Check and wait until results of the connectivity check are returned. Note that the status is Unreachable.

Note: This is expected, since the two spoke virtual networks are not peered with each other (virtual network peering is not transitive).

Task 4: Configure routing in the hub and spoke topology

In this task, you will configure and test routing between the two spoke virtual networks by enabling IP forwarding on the network interface of the az104-06-vm0 virtual machine, enabling routing within its operating system, and configuring user-defined routes on the spoke virtual network.

1.In the Azure portal, search and select Virtual machines.

2.On the Virtual machines blade, in the list of virtual machines, click az104-06-vm0.

3.On the az104-06-vm0 virtual machine blade, in the Settings section, click Networking.

4.Click the az104-06-nic0 link next to the Network interface label, and then, on the az104-06-nic0 network interface blade, in the Settings section, click IP configurations

5.Set IP forwarding to Enabled and save the change.

Note: This setting is required in order for az104-06-vm0 to function as a router, which will route traffic between two spoke virtual networks.

Note: Now you need to configure operating system of the az104-06-vm0 virtual machine to support routing.

6.In the Azure portal, navigate back to the az104-06-vm0 Azure virtual machine blade and click Overview.

7.On the az104-06-vm0 blade, in the Operations section, click Run command, and, in the list of commands, click RunPowerShellScript.

8.On the Run Command Script blade, type the following and click Run to install the Remote Access Windows Server role.

Install-WindowsFeature RemoteAccess -IncludeManagementTools

Note: Wait for the confirmation that the command completed successfully

9.On the Run Command Script blade, type the following and click Run to install the Routing role service.

Install-WindowsFeature -Name Routing -IncludeManagementTools -IncludeAllSubFeature
Install-WindowsFeature -Name “RSAT-RemoteAccess-Powershell”
Install-RemoteAccess -VpnType RoutingOnly
Get-NetAdapter | Set-NetIPInterface -Forwarding Enabled

Note: Wait for the confirmation that the command completed successfully.

Note: Now you need to create and configure user defined routes on the spoke virtual networks.

10.In the Azure portal, search and select Route tables and, on the Route tables blade, click + Create.

11.Create a route table with the following settings (leave others with their default values)

SettingValue
Subscriptionthe name of the Azure subscription you are using in this lab
Resource groupaz104-06-rg1
Locationthe name of the Azure region in which you created the virtual networks
Nameaz104-06-rt23
Propagate gateway routesNo

12.Click Review and Create. Let validation occur, and click Create to submit your deployment.

Note: Wait for the route table to be created. This should take about 3 minutes.

13.Back on the Route tables blade, click Refresh and then click az104-06-rt23.

14.On the az104-06-rt23 route table blade, in the Settings section, click Routes, and then click + Add.

15.Add a new route with the following settings (leave others with their default values):

SettingValue
Route nameaz104-06-route-vnet2-to-vnet3
Address prefix10.63.0.0/20
Next hop typeVirtual appliance
Next hop address10.60.0.4

16.Click OK

17.Back on the az104-06-rt23 route table blade, in the Settings section, click Subnets, and then click + Associate.

18.Associate the route table az104-06-rt23 with the following subne

SettingValue
Virtual networkaz104-06-vnet2
Subnetsubnet0

19.Click OK

20.Navigate back to Route tables blade and click + Create.

21.Create a route table with the following settings (leave others with their default values):

SettingValue
Subscriptionthe name of the Azure subscription you are using in this lab
Resource groupaz104-06-rg1
Regionthe name of the Azure region in which you created the virtual networks
Nameaz104-06-rt32
Propagate gateway routesNo

22.Click Review and Create. Let validation occur, and hit Create to submit your deployment.

Note: Wait for the route table to be created. This should take about 3 minutes.

23.Back on the Route tables blade, click Refresh and then click az104-06-rt32.

24.On the az104-06-rt32 route table blade, in the Settings section, click Routes, and then click + Add.

25.Add a new route with the following settings:

SettingValue
Route nameaz104-06-route-vnet3-to-vnet2
Address prefix10.62.0.0/20
Next hop typeVirtual appliance
Next hop address10.60.0.4

26.Click OK

27.Back on the az104-06-rt32 route table blade, in the Settings section, click Subnets, and then click + Associate.

28.Associate the route table az104-06-rt32 with the following subnet:

SettingValue
Virtual networkaz104-06-vnet3
Subnetsubnet0

29.Click OK

30.In the Azure portal, navigate back to the Network Watcher – Connection troubleshoot blade.

31.On the Network Watcher – Connection troubleshoot blade, initiate a check with the following settings (leave others with their default values):

SettingValue
Subscriptionthe name of the Azure subscription you are using in this lab
Resource groupaz104-06-rg1
Source typeVirtual machine
Virtual machineaz104-06-vm2
DestinationSpecify manually
URI, FQDN or IPv410.63.0.4
ProtocolTCP
Destination Port3389

32.Click Check and wait until results of the connectivity check are returned. Verify that the status is Reachable. Review the network path and note that the traffic was routed via 10.60.0.4, assigned to the az104-06-nic0 network adapter. If status is Unreachable, you should restart az104-06-vm0.

Note: This is expected, since the traffic between spoke virtual networks is now routed via the virtual machine located in the hub virtual network, which functions as a router.

Note: You can use Network Watcher to view topology of the network.

Task 5: Implement Azure Load Balancer

In this task, you will implement an Azure Load Balancer in front of the two Azure virtual machines in the hub virtual network

1.In the Azure portal, search and select Load balancers and, on the Load balancers blade, click + Create.

2.Create a load balancer with the following settings (leave others with their default values):

SettingValue
Subscriptionthe name of the Azure subscription you are using in this lab
Resource groupthe name of a new resource group az104-06-rg1
Nameaz104-06-lb4
Regionname of the Azure region into which you deployed all other resources in this lab
TypePublic
SKUStandard
Public IP addressCreate new
Public IP address nameaz104-06-pip4
Availability zoneNo Zone
Add a public IPv6 addressNo

3.Click Review and Create. Let validation occur, and hit Create to submit your deployment.

Note: Wait for the Azure load balancer to be provisioned. This should take about 2 minutes.

4.On the deployment blade, click Go to resource.

5.On the az104-06-lb4 load balancer blade, in the Settings section, click Backend pools, and click + Add.

6.Add a backend pool with the following settings (leave others with their default values):

SettingValue
Nameaz104-06-lb4-be1
Virtual networkaz104-06-vnet01
IP versionIPv4
Virtual machineaz104-06-vm0
Virtual machine IP addressipconfig1 (10.60.0.4)
Virtual machineaz104-06-vm1
Virtual machine IP addressipconfig1 (10.60.1.4)

7.Click Add

8.Wait for the backend pool to be created, in the Settings section, click Health probes, and then click + Add.

9.Add a health probe with the following settings:

SettingValue
Nameaz104-06-lb4-hp1
ProtocolTCP
Port80
Interval5
Unhealthy threshold2

10.Click Add

11.Wait for the health probe to be created, in the Settings section, click Load balancing rules, and then click + Add.

12.Add a load balancing rule with the following settings (leave others with their default values):

SettingValue
Nameaz104-06-lb4-lbrule1
IP VersionIPv4
Frontend IP Addressselect the LoadBalancerFrontEnd from the drop down
ProtocolTCP
Port80
Backend port80
Backend poolaz104-06-lb4-be1
Health probeaz104-06-lb4-hp1
Session persistenceNone
Idle timeout (minutes)4
TCP resetDisabled
Floating IP (direct server return)Disabled

13.Click Add

14.Wait for the load balancing rule to be created, in the Settings section, click Frontend IP configuration, and note the value of the Public IP address.

15.Start another browser window and navigate to the IP address you identified in the previous step.

16.Verify that the browser window displays the message Hello World from az104-06-vm0 or Hello World from az104-06-vm1.

17.Open another browser window but this time by using InPrivate mode and verify whether the target vm changes (as indicated by the message).

Note: You might need to refresh the browser window or open it again by using InPrivate mode.

Task 6: Implement Azure Application Gateway

In this task, you will implement an Azure Application Gateway in front of the two Azure virtual machines in the spoke virtual networks.

1.In the Azure portal, search and select Virtual networks.

2.On the Virtual networks blade, in the list of virtual networks, click az104-06-vnet01.

3.On the az104-06-vnet01 virtual network blade, in the Settings section, click Subnets, and then click + Subnet.

4.Add a subnet with the following settings (leave others with their default values):

SettingValue
Namesubnet-appgw
Subnet address range10.60.3.224/27

5.Click Save

Note: This subnet will be used by the Azure Application Gateway instances, which you will deploy later in this task. The Application Gateway requires a dedicated subnet of /27 or larger size.

6.In the Azure portal, search and select Application Gateways and, on the Application Gateways blade, click + Create.

7.On the Basics tab of the Create an application gateway blade, specify the following settings (leave others with their default values):

SettingValue
Subscriptionthe name of the Azure subscription you are using in this lab
Resource groupthe name of a new resource group az104-06-rg1
Application gateway nameaz104-06-appgw5
Regionname of the Azure region into which you deployed all other resources in this lab
TierStandard V2
Enable autoscalingNo
HTTP2Disabled
Virtual networkaz104-06-vnet01
Subnetsubnet-appgw

8.Click Next: Frontends > and, on the Frontends tab of the Create an application gateway blade, click Add new, and specify the following settings (leave others with their default values):

SettingValue
Frontend IP address typePublic
Public IP addressthe name of a new public ip address az104-06-pip5

9.Click Next: Backends >, on the Backends tab of the Create an application gateway blade, click Add a backend pool, and, on the Add a backend pool blade, specify the following settings (leave others with their default values):

SettingValue
Nameaz104-06-appgw5-be1
Add backend pool without targetsNo
Target typeIP address or FQDN
Target10.62.0.4
Target typeIP address or FQDN
Target10.63.0.4

Note: The targets represent the private IP addresses of virtual machines in the spoke virtual networks az104-06-vm2 and az104-06-vm3.

10.Click Add, click Next: Configuration > and, on the Configuration tab of the Create an application gateway blade, click + Add a routing rule.

11.On the Add a routing rule blade, on the Listener tab, specify the following settings:

SettingValue
Rule nameaz104-06-appgw5-rl1
Listener nameaz104-06-appgw5-rl1l1
Frontend IPPublic
ProtocolHTTP
Port80
Listener typeBasic
Error page urlNo

12.Switch to the Backend targets tab of the Add a routing rule blade and specify the following settings (leave others with their defau

SettingValue
Target typeBackend pool
Backend targetaz104-06-appgw5-be1

13.Click Add new under to the HTTP settings text box, and, on the Add an HTTP setting blade, specify the following settings (leave others with their default values):

SettingValue
HTTP settings Nameaz104-06-appgw5-http1
Backend protocolHTTP
Backend port80
Cookie-based affinityDisable
Connection drainingDisable
Request time-out (seconds)20

14.Click Add on the Add an HTTP setting blade, and back on the Add a routing rule blade, click Add.

15.Click Next: Tags >, followed by Next: Review + create > and then click Create.

Note: Wait for the Application Gateway instance to be created. This might take about 8 minutes.

16.In the Azure portal, search and select Application Gateways and, on the Application Gateways blade, click az104-06-appgw5.

17.On the az104-06-appgw5 Application Gateway blade, note the value of the Frontend public IP address.

18.Start another browser window and navigate to the IP address you identified in the previous step.

19.Verify that the browser window displays the message Hello World from az104-06-vm2 or Hello World from az104-06-vm3.

20.Open another browser window but this time by using InPrivate mode and verify whether the target vm changes (based on the message displayed on the web page).

Note: You might need to refresh the browser window or open it again by using InPrivate mode.

Note: Targeting virtual machines on multiple virtual networks is not a common configuration, but it is meant to illustrate the point that Application Gateway is capable of targeting virtual machines on multiple virtual networks (as well as endpoints in other Azure regions or even outside of Azure), unlike Azure Load Balancer, which load balances across virtual machines in the same virtual network.

Clean up resources

Note: Remember to remove any newly created Azure resources that you no longer use. Removing unused resources ensures you will not see unexpected charges.

1.Note: Remember to remove any newly created Azure resources that you no longer use. Removing unused resources ensures you will not see unexpected charges.

2.List all resource groups created throughout the labs of this module by running the following command:

Get-AzResourceGroup -Name ‘az104-06*’

3.Delete all resource groups you created throughout the labs of this module by running the following command:

Get-AzResourceGroup -Name ‘az104-06*’ | Remove-AzResourceGroup -Force -AsJob
  1. Note: The command executes asynchronously (as determined by the -AsJob parameter), so while you will be able to run another PowerShell command immediately afterwards within the same PowerShell session, it will take a few minutes before the resource groups are actually removed.

Review

In this lab, you have:

  • Provisioned the lab environment
  • Configured the hub and spoke network topology
  • Tested transitivity of virtual network peering
  • Task 4: Configure routing in the hub and spoke topology
  • Task 5: Implement Azure Load Balancer
  • Task 6: Implement Azure Application Gateway